You also can save some presets for your material. You can set all of these settings by pressing the little wrench and then adjusting them on the bottom of the application window. For cutting grey cardboard around 0.5 to 1.5 mm you can set this to <=1 mm. This is the amount of material the laser will take away. There is also another setting we need to take in account. This will determine how narrow/wide the holes for tongues and tabs are we are going to produce later on. What’s more important is to set the “Thickness” of your material. if your desired object size exceeds you material size the application will allow you to export several cut sheets. Another way is adjusting the size based on your material size. You can set the “Object Size” when you need a defined size. This can be set to a fairly huge size (the laser cutter at the University of Applied Sciences Potsdam (Germany) has a size of 1200 mm to 900 mm). The manufacturing settings allow you to set the size of your material. When you import your 3D model you first need to set some options. We will cut them with different settings leaving a visual mark where to fold your material. The marks for the folding lines are enough to. You need an Autodesk account for exporting your plans.In there you’ll find the PDF under /Applications/SlicerForFusion360.app/Contents/ On Mac OSX you can extract the Help PDF by opening the application package.Splitting the panels can save you a lot of material.Use the Right Mouse Button and paste from the pop up menu. On a German localized computer the application accepts as decimal point the comma when entering values by typing - even though the numbers are displayed with a dot.This cannot be set globally you will need to adjust this for each panel where you use units.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |